80mm DC servomotor 2.4NM 750W 310V 48V 3000RPM
Spesifikaasjes
| Produkt Namme | Standert DC Servo Motor |
| Beskermje Feature | IP65 |
| foltaazje | 48V, 310V |
| Faasje (RPM | 3000 RPM |
| Wurk temperatuer | 0℃~+55℃ |
| Wurkje of bewarje | 90% RH (Gjin kondensaasje) Boppe seenivo 1000m |
| Vibraasje | 5.88/S 2.10-60Hz |
| Diameter | 80 mm |
| Isolaasje klasse | F |
| Bewarje temperatuer | 20 ℃ ~ 80 ℃ |
| Krêft | 750W |
produkt Omskriuwing
80mm DC servomotor 2.4NM 750W 310V 48V 3000RPM
In servomotor wurdt regele troch syn posysje te kontrolearjen mei Pulse Width Modulation Technique.De breedte fan 'e pols tapast op' e motor is fariearre en stjoert foar in fêste tiid.
De pulsbreedte bepaalt de hoekposysje fan 'e servomotor.Bygelyks, in pulsbreedte fan 1 ms soarget foar in hoekposysje fan 0 graden, wylst in pulsbreedte fan 2 ms in hoekbreedte fan 180 graden feroarsaket.
| Model ES 80 Series | ||||||||
| Rated Power | Rated Voltage | Max radiale krêft | Maksimum axiale krêft | Gewicht | Shaft type | Shaft diameter | Feedback apparaat | Gjin peallen |
| 750W | 310V | 335N | 150N | 2,45kg | Key shaft | φ19 | 2500ppr | 8 pyk |
| 750W | 48V | 335N | 150N | 2,45kg | Key shaft | φ19 | - | 8 pyk |
Technysk
| MODEL | RATED POWER (WATTS) | RATED VOLTAGE | RATED AKTUID (AMPS) | RATED SPEED (RPM) | RATED KORREL (NM) | PEAK KORREL (NM) | ANTI-POWER POTENSIEL KONSTANT (V/KRPM) | KOPPELKOEFFISIENT (NM/AMPS) | ROTOR INERTIA (KG.CM2) | WIRE-WOUND (INTER-WIRE) WEERSTAND (Ω) | WINDING (INTERLINE) INDUCTANCE (MH) | ELEKTRISKE TIID KONSTANT (MS) |
| ES8004A-75S30B1 | 750 | 310 | 4.0 | 3000 | 2.4 | 7.2 | 39 | 0.6 | 1.51 | 1.4 | 9.0 | |
| ES8005A-75D30A1 | 750 | 310 | 4.0 | 3000 | 2.4 | 7.2 | 39 | 0.6 | 1.51 | 1.5 | 11.0 | |
| ES8005A-75D30B2 | 750 | 310 | 4.0 | 3000 | 2.4 | 7.2 | 39 | 0.6 | 1.51 | 1.5 | 11.0 | |
| ES8005A-75D30L1 | 750 | 310 | 4.0 | 3000 | 2.4 | 7.2 | 39 | 0.6 | 1.51 | 1.5 | 11.0 | |
| ES8005A-75D30L2 | 750 | 310 | 4.0 | 3000 | 2.4 | 7.2 | 39 | 0.6 | 1.51 | 1.5 | 11.0 | |
| Low-voltage servo ES8004G-75S30B1 | 750 | 48 | 20 | 3000 | 2.38 | 7.2 | 8 | 0.132 | 1.51 | 0.15 | 0.5 |
Opmerking: De produkten kinne wurde oanpast troch jo oanfraach.Nim dan kontakt mei ús op foar mear details.
80 Series Mei rem
| PIN | FUNKSJE | KLEUR |
| 1 | U | Read |
| 2 | V | Wyt |
| 3 | W | Swart |
| 4 | G | Giel grien |
| 5 | Rem | Giel |
| 6 | Rem | Blau |
| PIN | FUNKSJE | KLEUR |
| 1 | OV | Swart |
| 2 | / | |
| 3 | SD+ | Blau |
| 4 | +5V | Read |
| 5 | BAAI- | Brún / Swart |
| 6 | BAT+ | Brún |
| 7 | SD- | Blau / Swart |
| 8 | / | |
| 9 | GND | Griis (Shield) |
| Type | 80 | |
| Krêft | 750W | |
| Encoder | ||
| L (mm) | A | 125,5 |
| B | 179 | |
| L | 179 | |
| N |
| |
| Type | 80 | |
| Krêft | 750W | |
| Encoder | ||
|
Gewicht (Kg)
| A | 3.47 |
| B | 2.45 | |
| L | 3.49 | |
| N |
| |
Opmerking: A, B, L, N ferwiist nei ferskate encoder.
A = tamagawa single-turn absolute wearde 17-bit encoder
B = inkrementele 2500ppr optyske encoder
L = tamagawa multi-turn absolute wearde 17-bit encoder
N=Nikon multi-turn absolute wearde 24 bit
80 Series sûnder rem
| PIN | FUNKSJE | KLEUR |
| 1 | U | Read |
| 2 | V | Wyt |
| 3 | W | Swart |
| 4 | G | Giel grien |
| PIN | FUNKSJE | KLEUR |
| 1 | Shield | NC |
| 2 | DC+5V | Read |
| 3 | GND | Swart |
| 4 | B | Grien |
| 5 | Z- | Giel/wyt |
| 6 | U | Brún |
| 7 | Z | Giel |
| 8 | U- | Brún/wyt |
| 9 | A | Griis |
| 10 | W | Oranje |
| 11 | V | Blau |
| 12 | W- | Oranje/wyt |
| 13 | A- | Griis/wyt |
| 14 | B- | Grien/wyt |
| 15 | V- | Blau/wyt |
| Type | 80 | |
| Krêft | 750W | |
| Encoder | ||
| L (mm) | A | 125 |
| B | 141 | |
| L | 141 | |
| N | ||
| Type | 80 | |
| Krêft | 750W | |
| Encoder | ||
| Gewicht (Kg) | A | 2.42 |
| B | 2.43 | |
| L | 2.43 | |
| N |
| |
Opmerking: A, B, L, N ferwiist nei ferskate encoder.
A = tamagawa single-turn absolute wearde 17-bit encoder
B = inkrementele 2500ppr optyske encoder
L = tamagawa multi-turn absolute wearde 17-bit encoder
N=Nikon multi-turn absolute wearde 24 bit
Servo workshop
Op grûn fan al dizze foardielen is ús bedriuw spesjalisearre yn it produsearjen fan hybride stapmotoren, DC-borstelleaze motors, servomotoren, gearboxmotoren, ensfh.De produkten wurde tapast yn robots, ferpakkingsmasines, tekstylmasines, medyske ynstruminten, printmasines, yntelliginte logistike apparatuer ... Hetai stjoert har produkten ek nei de FS, Europa, Súdeast-Aazje, en rûnom Sina.
