36mm Nema 14 DC Brush Gear Motor 24V 240RPM
Ƙayyadaddun bayanai
| Sunan samfur | Dc Brush Gear Motor |
| Amfani | aikace-aikacen atomatik |
| Torque | 0.64 NM |
| Gina | Magnet na Dindindin |
| Siffar Kare | IP40 |
| Gudun (RPM) | 240 ± 15% |
| Gudun babu kaya | 300± 10% rpm |
| Ci gaba na Yanzu (A) | ≤2.5A |
| Ƙarfin wutar lantarki | 24V |
| Rage Rago | 25:1 |
| Juriya irin ƙarfin lantarki | AC600V/1 mA/1S |
Bayanin Samfura
36mm Nema Brush Gear Motar 24V 240RPM
Motar tana da karfin juyi na 0.64NM da saurin rpm 240.
Kowane aikace-aikacen yana da takamaiman buƙatu na saurin gudu da juzu'i.Lokacin da kaya ke buƙatar babban juzu'i a cikin ƙananan gudu, amfani da babban motar DC mai iya haɓaka ƙarfin wutar lantarki ba zai yi kyau ba kuma ingancin tsarin zai yi ƙasa.Mafi kyawun bayani a cikin irin waɗannan lokuta shine gabatar da ƙaramin motar dc tare da gearing, daidaita motar zuwa kaya don saurin gudu, juzu'i ko inertia.Brush na DCmotor da gearbox taro, ko babban karfin juyi DC gear motor, zai samar da mafi girma inganci a cikin wani tattalin arziki bayani.
Ƙimar Lantarki
| Samfura | 36mm Brush gear motorSaukewa: 36PG3857-XXXX-25K-1 |
| Voltage (V) | 24V |
| Rated Torque tare da akwatin gear (NM) | 0.64 nm |
| Matsakaicin Gudu (rpm) | 240 ± 15% |
| Rated Curremt (A) | ≤2.5 A |
| Juriya irin ƙarfin lantarki | AC600V/1 mA/1S |
| Girman Motoci (mm) | 36*36*92mm |
Girman Injini
Sauran ragi na 36mm foda karfe gearbox
| Ƙayyadaddun Lantarki na Gearbox 36mm: | |||||||||
| Rage rabo | 5 | 16 | 10 | 25 | 53 | 62 | 76 | 94 | 117 |
| Yawan jiragen kasa na kaya | 1 | 2 | 3 | ||||||
| Ingantaccen watsawa | 81% | 72% | 65% | ||||||
| Ƙimar juriyar juriya | 0.3 nm | 1.2 nm | 2.5 nm | ||||||
| Matsakaicin juriyar haƙuri na ɗan lokaci | 1 nm | 3.5 nm | 7.5 nm | ||||||
| tsayi (mm) | 24.8 | 32.4 | 41.9 | ||||||
| Nauyi (g) | 145 | 173 | 213 | ||||||
| Matsakaicin nauyin radial (flange 10mm) | ≤120N | ||||||||
| Max shaft axial load | ≤80N | ||||||||
| Kayan gida | Foda karfe | ||||||||
| Bayar da fitarwa | hannun riga bearings | ||||||||
| Shaft press-fit karfi max | ≤500N | ||||||||
| Radial wasa na shaft (mm) | ≤0.03 | ||||||||
| Juyawa wasan shaft(mm) | ≤0.1 | ||||||||
| Koma baya ba tare da kaya ba (°) | ≤1.5 | ||||||||
*** Lura: Ana iya keɓance samfuran ta buƙatarku.Da fatan za a tuntuɓe mu don ƙarin bayani.
Tsarin samarwa
Kayan aikin samarwa
Shiryawa & Bayarwa
