Micro 22mm 0.87 inch Gearbox Motor Brushless Motor 24 V 75 RPM oo leh ROHS CE ISO
Tilmaamaha
Magaca Alaabta | Gearbox motoor aan burush lahayn |
Voltage Magaca ah | 24V |
Xawaaraha la qiimeeyay | 75± 10% |
Torque Constant | 0.033 Nm/A |
Layn ilaa Line Resistance | 9 OHMS |
Torque la qiimeeyay | 0.8 Nm |
Tuubada Ciyaarta Shaft | ≤0.4 |
Shaft Axial Load | ≤15N |
Saamiga dhimista | 1/64 |
Torque Constant | 0.033 Nm/A |
Dib-u-dhac La'aan | ≤15° |
Heerka dahaarka | F |
Sharaxaada Alaabta
Matoor yar oo dc gear ah oo leh xawaare yar iyo qulqulka weyn ee 22mm gear motor wuxuu bixiyaa 0.8 Nm torque iyo ka badan oo la isku halayn karo oo ku habboon meel yar.
Matoorada sanduuqa gear-ka ee aan burushka lahayn way ka yar yihiin, ka fudud yihiin, ka aamusan yihiin, waxaanay leeyihiin nolol hawleed ka dheer kuwa dhigooda ah ee la cadaydo, sidoo kale waxay bixiyaan waxqabad heersare ah marka loo eego hufnaanta iyo isbarbardhigga.Si kastaba ha ahaatee, dhibaatooyinka farsamo ee naqshadeynta matoorrada yaryar si ay ugu shaqeeyaan xawaare hoose oo dhowr boqol oo rpm ah ayaa ka dhigaya qalab muhiim u ah codsiyadan.Marka lagu daro qalabka wax lagu dhejiyo, matoorku wuxuu awood u leeyahay inuu keeno qulqulka sare iyo xawaaraha hooseeya isagoo weli ilaalinaya dhammaan faa'iidooyinka mashiinka gearbox ee aan burushka lahayn.
Naqshadeynta mashiinka korantada ee gearbox waxaa lagu go'aamiyaa arrimo ay ka mid yihiin xawaaraha wax soo saarka ee loo baahan yahay iyo qulqulka iyo booska bannaan ee lagu rakibo.Nasiib wanaag, naqshadaynta qalabkan waxaa fududeeyay xulashooyin badan oo kala duwan oo aan burush lahaynmatoorada waxay bixiyaan kuwan xuduudaha waxqabadka aasaasiga ah.
Tilmaamaha Korontada
Qaabka wax-soo-saarka | 22BL202AG64 | |
Layn ilaa Line Resistance | OHMS | 9 |
Line to Line Inductance | MH | 2.2 |
Voltage Magaca ah | VDC | 24 |
Xawaaraha rarka ma jiro | RPM | 7000± 10% |
Wax Xamuul ah ma jiro | Amps | 0.3 |
Torque la qiimeeyay | Nm | 0.02 |
Xawaaraha la qiimeeyay | Rpm | 4800± 10% |
Back Emf Constant | V/kRPM | 3.5 |
Torque Constant | Nm/A | 0.033 |
Heerka dahaarka |
| F |
QAABKA mootada ee leh qalabka meerayaasha 0.65 | ||
Torque la qiimeeyay | Nm | 0.8 |
Xawaaraha la qiimeeyay | Rpm | 75± 10% |
Saamiga |
| 64:1 |
* Alaabta waxaa lagu habeyn karaa codsi gaar ah.
jaantuska xargaha
Miiska Xidhiidhka Korontada | ||
SHAQADA | MIDABKA |
|
+5V | CASAAN | UL1332 28AWG |
Hoolka A | BUNNI |
|
Hoolka B | CADAAN |
|
Hoolka C | guduud |
|
GND | MADOW |
|
WAJIGA A | JALE |
|
WAJIGA B | CAGAAR |
|
WAJIGA C | BULUUG |
|
NTC | ORANGE |
Dhexroor ka baxsan 22mm biraha budada ah
Qalabka guryaha | Wax-soo-saarka | Xamuulka shucaaca (10mm laga soo bilaabo flange) N | Shaft axial load(N) | Shaft press-fit force max(N) | Ciyaarta shucaaca ee usheeda dhexe (mm) | Ku ciyaarista usheeda dhexe (mm) | Dib-u-celinta oo aan raar lahayn (°) |
Macdanta budada ah | Xirmooyinka Daloosha | ≤35 | ≤15 | ≤80 | ≤0.08 | ≤0.4 | ≤1.5 |
Saamiga dhimista | Wareegga dulqaadka ee la qiimeeyay (Nm) | Dhaqdhaqaaqa dulqaadka wakhtiga ugu badan (Nm) | Waxtarka% | Dhererka L (mm) | Miisaanka (g) | Tirada tareenada qalabka |
1/4 | 0.1 | 0.3 | 81% | 13.9 | 29 | 1 |
1/4.75 | ||||||
1/16 | ||||||
1/19 | 0.4 | 1.2 | 72% | 32.4 | 52 | 2 |
1/22 | ||||||
1/26 | ||||||
1/76 | 0.8 | 2.5 | 75% | 43.9 | 73 | 3 |
1/88 | ||||||
1/104 | ||||||
1/121 | ||||||
1/144 |
Saamiga dhimista | Wareegga dulqaadka ee la qiimeeyay (Nm) | Dhaqdhaqaaqa dulqaadka wakhtiga ugu badan (Nm) | Waxtarka% | Dhererka L (mm) | Miisaanka (g) | Tirada tareenada qalabka |
1/104 | 0.4 | 1.2 | 65% | 22.5 | 30 | 3 |